Powder packaging machine's scattered materials should be cleaned up promptly.
Release Date:
2021-10-17
Powder Packaging Machine
The packaging speed and bag length of the powder packaging machine can be steplessly adjusted within an additional range without replacing parts. The bag length is digitally set through the packaging machine controller, using a stepper motor to drive the bag pulling, making bag length adjustment simple and convenient, with accurate bag length and stable, reliable operation. The heat sealer body uses four-way heating control, with presettable heat sealing temperature and automatic temperature control to ensure excellent thermal balance, suitable for various packaging materials to ensure tight and neat bag sealing. A high-quality photoelectric switch (eye) is used to detect and position the printed color marks on the packaging material, ensuring the packaged product obtains a perfect trademark pattern. (The intelligent photoelectric color mark positioning control system can automatically eliminate interference signals caused by abnormal color mark patterns and poor printing on packaging materials, ensuring stable and reliable operation.) It automatically prints the batch number or production date on the packaged product. Each packaged product has an easy-tear notch for consumer convenience. When changing the bag width of the packaged product, the forming device for bag making needs to be replaced. All parts in contact with the packaged material are made of stainless steel or non-toxic materials, meeting the hygiene standards of the food and pharmaceutical industries. When packaging powder materials, pressing a button can automatically complete the operation, with fast running speed and power. 
Lubrication work. Regularly lubricate the meshing points of all gears, the oil injection holes of the bearing seats, and all moving parts with machine oil once per shift. The reducer must not operate without oil. When adding lubricant, be careful not to spill oil on the rolling belt to prevent slipping, loss of rotation, or premature aging and damage to the belt. Cleaning work. After the equipment stops, promptly clean the metering parts and frequently clean the heat sealer body to ensure clear sealing patterns on the packaged products. Spilled materials should be cleaned up promptly to keep the machine parts clean, thereby extending their service life. Also, frequently clean the dust inside the electrical control box to prevent short circuits or poor contact and other electrical faults. Maintenance work. Before using the powder packaging machine, check all screws to ensure there is no loosening, as this could affect the normal operation of the entire machine. Pay attention to waterproofing, moisture-proofing, corrosion prevention, and rodent prevention for the electrical parts to ensure the electrical control box and wiring terminals remain clean and prevent electrical faults. After shutdown, keep the two heat sealer bodies in the open position to prevent damage to the packaging materials from heat.
(All the above content is sourced from the internet. If there are any issues, please contact me for removal)
Contact Information
Address: No. 3, Shendong 7th Road, Fushun Economic Development Zone
National Service Hotline:+86 24 58067728
General Office:+86 24 58067728
Sales Department:+86 15804137755
After-sales Service:+86 15004137328
Email:green@fsgreen.com