How to maintain a powder packaging machine?
Release Date:
2021-09-27
It is necessary to regularly lubricate all gear meshing points, bearing oil injection holes with seats, and all moving parts with machine oil once per shift. The reducer must not operate without oil. When adding lubricating oil, be careful not to place the oil tank on the rotating belt to prevent slipping, loss of rotation, or premature aging and damage of the belt. Cleaning operations: After the equipment stops, promptly clean the metering parts and frequently clean the heat sealer body to ensure clear sealing patterns on the packaging products. Any spilled materials should be cleaned in time to maintain the cleanliness of the machine parts, thereby extending their service life. Also, frequently clean the dust inside the electrical control box to prevent short circuits or poor contact and other electrical faults, ensuring safe operation.
Before using the powder packaging machine, check all screws in various parts to ensure there is no looseness; otherwise, it will affect the normal operation of the entire machine. Pay attention to waterproofing, moisture-proofing, corrosion prevention, and rodent prevention for the electrical parts to keep the electrical control box and wiring terminals clean and prevent electrical faults. After shutdown, keep the two heat sealer bodies in the open position to prevent damage to the packaging materials. It uses a double screw feeding method controlled by a servo motor, with high precision and fast speed. The parts in contact with the material are made of 304 stainless steel. The structure is simple, easy to disassemble and clean. Operation is simple, convenient, and easy to repair.
Main Parameters Packaging Specification: 1–10 kg/bag Power: 220V 50HZ 750W Packaging Speed: 240–480 bags/hour Weight: 260 kg Packaging Accuracy: ±0.5% Dimensions (L*W*H): 1250*1000*2000 (mm)
Small Dose Powder Packaging Machine Equipment Introduction This packaging machine is a small dose quantitative packaging machine suitable for quantitative small packaging of powder materials in industries such as chemical, food, and agricultural products. It is especially suitable for quantitative packaging of relatively valuable products.
Microcomputer control, adjustable parameters, error can be automatically corrected; easy to use, not limited by production site; good corrosion resistance, does not contaminate materials; parts in contact with materials are made of 304 stainless steel, meeting food and pharmaceutical packaging standards. Technical Parameters Power Supply: AC220V 300W Packaging Accuracy: 1% Packaging Range: 5g-100g/bag Packaging Speed: 1500-2500 bags/hour Shell Material: Painted.
(All the above content is sourced from the internet. If there are any issues, please contact me to delete it.)
Contact Information
Address: No. 3, Shendong 7th Road, Fushun Economic Development Zone
National Service Hotline:+86 24 58067727
General Office:+86 24 58067728
Sales Department:+86 15804137755
After-sales Service:+86 15004137328
Email:green@fsgreen.com